Home > Products > Metal Lath & Accessories
Metal Lath & Accessories
CEMCO’s Metal Lath products include Expanded, Self-Furred, Paper-Backed, Cem-Mesh, Flat-Ribbed, and Hi-Ribbed produced from hot-dipped galvanized steel. Our full line of lath and plaster accessories includes Expansion and Control joint products by Niles, along with a multitude of screeds, weeps, corners, and architectural profiles. All CEMCO and Niles Building Product’s lath and plaster products meet or exceed the following industry standards:
- ASTM A653 (steel).
- ASTM’s C841, C847, and C1063 (forming).
- ASTM C924 (coating).
- UBC Standard No. 14-1
- Federal Specification UU-B-790a.
- ICC-ES Report no. 1623.
|
 |
Expanded Metal Lath
CEMCO’s versatile metal lath is ideal as a plaster base and reinforcement for all types of construction in walls, ceilings, and fireproofing of steel beams and columns.
|
|
 |
Flat Rib Lath
A more rigid lath that the diamond mesh, CEMCO’s Flat Rib lath with its 1/8” longitudinal ribs at 3” on center, provide for greater stiffness allowing wider spacing between wooden or metal supports.
|
|
 |
Hi Rib
The most rigid of CEMCO’s lath product line, the riblath has full 3/8” ribs running longitudinally through the lath 4” on center. Between each 3/8” rib is a 1/8” rib which provides for extra stiffness. The rigidity of this lath allows a span up to 24” on center for supporting members. CEMCO’s 3/8” rib is widely used for 1” solid partitions, ceilings, and walls and as reinforcements for concrete floor and roof slab.
|
|
 |
Expansion Joints
As the premier provider of metal lath products to the construction industry, CEMCO offers expansion joints and expanded corner beads manufactured by Niles Building Products, Inc.
|
|
 |
Screeds, Casings, and Weeps
CEMCO manufactures several types of weeps, screeds, and casing beads for the exterior plaster industry. All are manufactured to tight tolerances using hot dipped galvanized steel that meets ASTM, Federal Specification, and FHA specifications.
|
|
 |
Corner Accessories
CEMCO provides along with its extensive metal lath and accessory product line, corner accessories for every application used by today’s contractors.
|
|
 |
Patches
Patches are a recent development by CEMCO based on a timeless use of 2.5 diamond lath, but manufactured in strips or ‘patches’ to be used over door and window corners to greatly reduce cracking, by reinforcing stress areas. Patches can also be used as grout stop in masonry applications.
|
|
 |
Tile Products
CEMCO has been producing both the “U” and “Z” -Shaped tile caps with ½” holes for more than 30 years. These caps allow for positive attachment between the Portland cement or mastic based adhesive, and the ceramic tile cap, while providing a straight edge to enhance the final look of the countertop.
|
|
 |
Water Management Products
The nine items in CEMCO's line of Water Management products address the critical need for water management in stucco assemblies.
|
|
|