|
|
Home > Products > FAS Fire Management Products
FAS Fire Management Products
CEMCO FAS Products
Fire Rated Head of Wall Solutions
CEMCO’s Fire-Air-Sound products (FAS) are the industry’s latest fire-abatement systems so far ahead of today’s typical head-of-wall systems, that comparing them to FAS track is like comparing a bicycle to a racecar! CEMCO’s FAS Track, FAS Strap, and FAS Shaft Wall Track are the head-of-wall rated solutions architects, engineers, owners, and developers alike have sought for years. Here are the FACTS about FAS Products:
• Class II and III movement Capabilities
• 100% unencumbered movement
• L-Rating of below 1 CFM (Best Possible Rating)
• Additional sound rating
• Zero Fatigue for the lifetime of the fire rated assembly
• One, two and three hour UL rated assemblies
• One and two inch deflection movement capabilities
• One and two inch deflection movement for shaft wall assemblies
• SEVERAL UL Fire Rated Assemblies specifically designed for metal stud framing
• Wall width sizes from 2-1/2” through 8”
• Track gauges from 33 mil through 68 mil
• Contributes to “Indoor Air Quality”
• Does not give off any VOC’s
• Single step application
• Receives fire rating without the use of fire caulking, fire sprays, additional drywall rips, and in some cases mineral wool
It’s no wonder why the architectural community is beginning to specify FAS products in lieu of other traditional head-of wall systems. There are no other UL fire-rated assemblies that can offer what FAS products do. FAS products simplicity in design save time, labor, and requires less clean up.
To get cost analysis of how FAS Track, FAS Strap, or FASA Shaft Wall compare with your current Head of Wall Assembly, contact your local sales representative or Don Pilz at dpilz@cemcosteel.com. FAS Track: The answer is HERE!
|
|
 |
FAS Track 500
FAS TRACK 500 is the latest offering in the CEMCO Fire Management Product Line. FAS Track 500 will provide ½” total movement for solid concrete deck dynamic head of wall fire rated joints according to the strict requirements of UL 2079. The unique profile allows the intumescent to be pinched between the concrete deck and the top web of the FAS Track 500 at all times. This permanent gasket style seal provides smoke protection in ambient conditions and received the best possible rating from UL of below 1 CFM.
|
|
 |
FAS Track Standard 1" Deflection
FAS™ Track is an exclusive CEMCO Fire Management product approach to fire-stopping dynamic joints allowing up to a full 1” (one inch) of unencumbered movement in a fire rated partition. The flexibility of the FAS™ Track product is used to protect dynamic joints in cold-formed steel /gypsum walls. The unique profile provides superior movement capabilities while eliminating any additional requirements of fire caulk, fire resistant sprays, drywall rips, or contour drywall cuts around fluted decks. The single source product allows 100% unencumbered movement while experiencing no fatigue to the fire resistance during the life of the assembly. This and all of the quality products offered by CEMCO are made in America.
|
|
|
FAS Track with 2" Deflection
As innovators, we at CEMCO realize the construction industry continues to evolve beyond what is currently standard. Part of this evolution is the need for greater deflection requirements. These new stringent demands have left contractors scrambling for economical and effective solutions. Well the search is over! CEMCO is the first major metal stud manufacturer to meet this challenge. CEMCO’s FAS Track 2 will now accommodate 2” total movement. With FAS Track 2 you will get the same fire, air and sound protection you get with the standard FAS Track but with the ability to handle up to a full 2” (two inches) of 100% unencumbered movement. This new system has been fully tested with Underwriters Laboratories, and is currently listed in no less than 12 new UL fire-rated assemblies!
|
|
 |
FAS Strap
CEMCO’s NEW FAS™ Strap is the first accessory in the “Fire Management” product line. FAS™ Strap eliminates the requirement for filling the fluted deck with mineral wool or fire proofing for all walls running parallel with the fluted deck. By incorporating cold-formed steel framing with intumescent into a composite product, CEMCO has again created a single step application that saves labor, time, and money. The UL assembly #HW-D-0524 allows the installer to use any one of CEMCO’s top tracks. When combined with CEMCO FAS™ Strap, there is no need for the fire caulking or fire sprays. This and all of the quality products offered by CEMCO are made in America.
|
|
 |
FAS Shaft Wall Track
FAS™ Shaft Wall Track provides the same great benefits as the FAS™ Track but in a shaft wall assembly. This allows for a full 1” (one inch) total deflection to carry throughout the floor from standard walls to shaft wall assemblies.
|
|
|
|
|
|
|
 |
|
Home
| Products
| Product Specs/Submittals | Evaluation Reports | Technical Services | Catalogs | Find A Dealer | AEC/AIA | Newsletter | LEED Info Request | Cold-Formed Steel Framing | FAS Fire Management Products | ViperStud® | Water Management | Metal Lath & Accessories | Head of Wall | Sure-Span® Floor Joist System | SureBoard® for Shear | USG Shaftwall Products | Pacific Coast Truss Fabricators | Inventory Specials | Project Purchase Agreement | LEED Certification | Request LEED Documents
| Customer Login
| News
| FAQS
| About Cemco
| Contact Us
| Site Map
| Terms of Use
|
|