 |
Solid Leg #15 Horizontal Control Joint
CEMCO Solid Leg #15 Horizontal Control Joint addresses a moisture
control problem that has been overlooked within stucco accessories. It is the first one-piece accessory that can provide drainage within the field of the stucco.
|
|
 |
J-Series Casing Bead
CEMCO J-Series Casing Bead is manufacturered non-perforated to enable the casing bead to have solid flashing capabilities.
|
|
 |
#6 Drip Head Screed
The #6 Drip Head Screed drives water away above windows, doors and vents on exterior plaster walls.
|
|
 |
M-Slide Expansion Joint
CEMCO M-Slide Expansion Joint is a unique two-piece accessory that provides exceptional movement and water management capabilities in stucco assemblies.
|
|
 |
#12 Soffit Drip Edge
The #12 Soffit Drip Edge is manufactured for soffit and recessed-window-head applications.
|
|
 |
#7 Extended Foundation Screed
The #7 Extended Foundation Screed provides an additional layer of 26-gauge G-90 metal to protect waterproof deck membranes at the base wall from U. V. degradation.
|
|
 |
#3 Flashing Screed
The #3 Flashing Screed is manufactured for applications above windows, doors and vents on exterior plaster walls. It consists of a combined single-piece 45-degree weep screed, for drainage, and a Z flashing for window head protection. It is available with or without weep holes.
Part of CEMCO’s Water Management product line of stucco accessories, it is fabricated from minimum 0.018-inch-thick hot-dipped galvanized steel complying with ASTM A653, having a minimum G-90 coating complying with ASTM A925.
|
|
 |
#9 Transition Control Joint
The #9 Transition Control Joint is manufactured for application over dissimilar substrates. The 45-degree slope allows water to weep out of the assembly. The lower screed point allows the wall to stay in alignment while also providing stucco movement capabilities to prevent stucco from cracking between dissimilar substrates.
|
|
 |
#17 Base Flashing
The #17 Base Flashing is manufactured for application at the base of the stucco assembly to dissimilar materials. The 45-degree slope combined with weep holes allows water to weep out of the assembly and the counter flashing leg provides protection to dissimilar materials.
|
|
 |
Water Management Products Catalog
The nine products in CEMCO's line of Water Management products address the critical need for watermanagement in stucco assemblies.
This catalog provides details for all of the accessories, which provide dual functions as stucco grounds and as flashings.
|
|
 |
Water Management Products Poster
This handy 20-by-24-inch poster provides details on CEMCO's line of nine accessories that combat the problem of moisture intrusion stucco assemblies.
|
|