Home > Products > Cold-Formed Steel Framing > Framing Accessories
Framing Accessories
These critical components are often combined with our stud and track systems to provide for extra bracing, furring, backing, and sound-dampening requirements. The available products in this group include:
-Resilient Channels.
-Furring/Hat Channels.
-Backing Plate/flat strapping.
-Notched Track.Weep track.
-Cold-Rolled/U-Channel.
-Various angles, clips, and brake shapes.
As with all of our CEMCO cold-formed framing products, each of these is produced from the same type of high quality mill certified prime steel, galvanized by the hot-dipped process.
| Steel Thickness per ASTM C955 |
|
|
|
|
|
Ga. (Mil) |
Design Thickness (in.) |
Minimum Thickness (in.) |
|
25 (18) |
0.0188 (0.478mm) |
0.0179 (0.454mm) |
|
22 (27) |
0.0285 (0.719mm) |
0.0271 (0.683mm) |
|
20 (30) |
0.0312 (0.792mm) |
0.0296 (0.753mm) |
|
20 (33) |
0.0346 (.879mm) |
0.0329 (0.835mm) |
|
18 (43) |
0.0451 (1.146mm) |
0.0428 (1.088mm) |
|
16 (54) |
0.0566 (1.438mm) |
0.0538 (1.366mm) |
|
14 (68) |
0.0713 (1.811mm) |
0.0677 (1.720mm) |
|
 |
7/8" Furring Hat Channel
This furring channel, often referred to as "Hat" channel due to its shape, provides 7/8" of furring depth for attachment of substrates. Manufactured with a knurled face for easier screw penetration, these channels are roll-formed in both .018 mil and .033 mil thicknesses.
|
|
 |
1 1/2" Furring "Hat" Channel
Like the shorter 7/8" furring channel, this taller sibling comes in both .018 mil and .033 mil thicknesses, and offers a knurled face for easier screw penetration.
|
|
 |
Cold-Rolled Channel / CRC
A versatile product commonly used as stiffeners in metal framing systems. Can also be used in suspended ceilings, furring applications, and both load and non-load bearing walls to help resist twisting of the wall studs.
|
|
 |
Standard Corner Angles - 90 degree
These angles can be used in a wide variety of applications, such as soffits, chase walls, furred walls, and many other custom configurations. Roll-formed from galvanized steel, they are available in a variety of leg sizes with a 90 degree angle, in 10' lengths.
|
|
 |
Resilient Channel - Single Leg (RC-1)
RC-1 is a pre-punched, 1/2" depth furring channel designed specifically for sound control by holding the gypsum wallboard away from the framing members, thus reducing vibration of sound through the wall cavity.
|
|
 |
Resilient Channel - Double Leg (RC-2)
Produced with 2 legs, this sound reduction channel sits 1/2" off of the framing members to also reduce the transmission of sound through walls and floors.
|
|
 |
Z-Furring Channel
Shaped like a "Z", this furring channel is used with rigid insulation in both wall and ceiling applications. While one channel provides for an attachment leg to the framing, the other, roll-formed to specific dimensions such as 1-1/2", 2", and 2-1/2" depths, holds the rigid insulation in place long after the assembly is completed Available in several thicknesses upon request.
|
|
 |
Angle Products (.043 mils up to .097 mils)
These angle products are often found in the exterior or load-bearing wall systems in a wide variety of applications. Made in 10' lengths, and in thicknesses ranging from .043 mils to .097 mils, they often provide solutions for complicated details.
|
|
 |
Custom Clip Angles
Custom parts are available from CEMCO in a infinite number of shapes, sizes, thicknesses, and coatings. Just contact your experienced CEMCO Customer Sales Representative for more information.
|
|
|
|