 |
Deflex Clips
The Deflex slide clip allows for 1-1/2” vertical floor/roof deflection without the use of multiple slip tracks, with or without standard leg top track. Two sizes are all that are needed to accommodate studs from 3-5/8” up to 8” in depth.
|
|
 |
DWSC Seismic Clips
The DWSC series of clips allow for vertical and lateral movement of the building structure independent of the studs. With a total of 3” vertical deflection and 2” of lateral movement, the DWSC clip uses shouldered screws which are included.
|
|
 |
Outrigger Slide Clips
Outrigger slide clips are used for horizontal surface applications and offer the highest capacity of any horizontal surface connection clip. The Outrigger clip comes in 18” lengths that can be field cut to shorter lengths. All Outrigger clips are 16 gauge.
|
|
 |
Rigid Clip Connectors
RCC rigid clip connectors are used to attach the bottoms of parapet studs to the structure, or where high tension or rotational restrain is required.
|
|
 |
WRC Rigid Clips
The WRC series of clips connects exterior studs to the building structure and resists horizontal and lateral loads. The WRC has embossments and a continuous flange to allow for excellent load values.
|
|
 |
WSC Slide Clips
WSC slide clips connect exterior curtainwall studs to the building structure and allow for vertical movement of the building independent of the studs. Total deflection is 3” (1-1/2” up and 1-1/2” down). WSC clips are made from 14 gauge steel, and come with shouldered screws.
|
|
 |
Utility Clips
UA series utility clips come in a variety of thicknesses (16, 14, & 12 gauge), and are used in several framing applications including floors, roofs, and walls. Lengths range from 3-1/4” through 15-3/4” in length, and leg widths in 1-1/2”, 2”, 3”, & 4”.
|
|