|
|
Home > Products > Metal Lath & Accessories > Screeds, Casings, and Weeps
Screeds, Casings, and Weeps
CEMCO manufactures several types of weeps, screeds, and casing beads for the exterior plaster industry. All are manufactured to tight tolerances using hot dipped galvanized steel that meets ASTM, Federal Specification, and FHA specifications.
Casing beads, sometimes referred to as stop beads, are available in either an expanded or solid flange, and with or without holes for weeping. The most common of these casing beads is the #66, which is available in grounds ranging from ¼” all the way up to 1 ¼”. All casing beads are delivered in cartons to protect the product until installation.
Weeps screeds do exactly what they are designed to do: weep water away from the structure through a series of holes. CEMCO’s No. 7 foundation screed is available in either FHA (26 ga.) thickness, or in an economy with 28 ga. steel, and in three depths: 4”, 5”, and the most common, 5 ½”. J-metal weeps channels are also available in both 26 and 28 gauge thicknesses, in either a 1 ¾” flange, or 3 ½” flange, depending upon the application. The J-metal comes in grounds from 3/8” all the way to 1 3/8”, and with or without holes. |
 |
J-Series Casing Bead
CEMCO J-Series Casing Bead is manufactured non-perforated to enable the casing bead to have solid flashing capabilities.
|
|
 |
#66 Short Flange Casing Bead
All ground casing beads have a short 90° turn at the plaster surface to neatly terminate plaster at the end of a wall or when it adjoins a dissimilar material. Manufactured with a slight arch in the nailing flange to assure a tight fit. Also available with weep holes.
|
|
 |
#66 Expanded Flange Casing Bead
Expanded flange casing bead also has a short 90° turn at the plaster surface for a neat finish. It also provides an extra long expanded flanges for tie-on application, and greater plaster key. Most commonly used with metal lath construction.
|
|
 |
J-Metals
A 26 gauge galvanized casing bead with various grounds used in conjunction with expanded polystyrene (EPS) foam insulation board. Provides a workable screed around doors and windows. Also available with holes so as to perform like a weep-screed.
|
|
|
 |
#36 Foundation Sill Screed
The #36 sill screed is similar to the popular #7, but less the bottom return wing that allows for access below the stucco line to clean excess material, while leaving NO VISIBLE METAL below the stucco line. Complete with weep holes. Also available in an "ECONO" 30 gauge thickness.
|
|
|
 |
#6 Drip Head Screed
The #6 Drip Head Screed is manufactured for application above windows, doors and vents on exterior plaster walls. The 45-degree slope allows for water to weep out of the assembly, and the 90-degree return provides a 3/4-inch solid metal leg for sealant application from stucco assembly to dissimilar materials.
|
|
 |
#12 Soffit Drip Edge
The #12 Soffit Drip Edge is manufactured for soffit and recessed-window-head applications.
|
|
 |
#7 Extended Foundation Screed
The #7 Extended Foundation Screed provides an additional layer of 26-gauge G-90 metal to protect waterproof deck membranes at the base wall from U. V. degradation.
|
|
 |
#3 Flashing Screed
The #3 Flashing Screed is manufactured for applications above windows, doors and vents on exterior plaster walls. It consists of a combined single-piece 45-degree weep screed, for drainage, and a Z flashing for window head protection. It is available with or without weep holes.
|
|
 |
#17 Base Flashing
The #17 Base Flashing is manufactured for application at the base of the stucco assembly to dissimilar materials. The 45-degree slope combined with weep holes allows water to weep out of the assembly and the counter flashing leg provides protection to dissimilar materials.
|
|
|
 |
|
Home
| Products
| Product Specs/Submittals | Technical Services | Catalogs | Find A Dealer | AEC/AIA | Newsletter | LEED Info Request | Cold-Formed Steel Framing | FAS Fire Management Products | ViperStud® | Water Management | Metal Lath & Accessories | Head of Wall | Sure-Span® Floor Joist System | SureBoard® for Shear | USG Shaftwall Products | Pacific Coast Truss Fabricators | Inventory Specials | Project Purchase Agreement
| Customer Login
| News
| FAQS
| About Cemco
| Contact Us
| Site Map
| Terms of Use
|
|